[Kster526]

Must have knocked some dirt loose in the carb Saturday in it’s travel a across counties and had to keep the choke out to keep her running while hauling leaves. Was hoping it would clean itself out but that didn’t work . So yesterday started tinkering and found a little dirt in the carb, then replaced the fuel filter and of course out of carb cleaner. So that’s it for today until I can get some then put her back together and see how she runs
Decided to touch up lettering on dash panel and add a little clear to it and then boredom set in and painted the air cleaner .
Once it’s running again will adjust its ability to creep that Don warned me about. One step at a time

 

[PA212]

Thank you for taking us all along for the ride @Kster526!

 

[truck21]

Those carbs are easy to work on though. Well the fender pan is off so may as well get out the green paint. Lol.

 

[Kster526]

Thought about it but the Honey Dew list is awaiting and have been told already.
Need to get to Pikeville today or tomorrow as I know I'll be working until 7:30-8 pm on Wed and Thur so would like to get it running again first. Going to give her plugs, filters and an oil change while she is hanging out. Looked at LED light upgrades for it also among a list of other wants. Just keep finding more things. Paint is the easy part
Want to put the same tires on the back that the 314 got so there is another $200.
That will really make her happy.
Ordered a repair manual from the good ole E-bay. Same guy I got the one for the 314 from. He does a nice job and there was already an order in for decals for the 210 seat.
That's why I said new blood breeds new enthusiasm.
Then there is a need for a hydraulic snow plow but do not want to sell the 210 until I have one. Then I am sure that will be moving on with mower deck, Should get good money for her with deck and plow.
YEASH!!!!!!!!!!!!!!!!!!!

 

[truck21]

Yeah its never ending. I don't want to think about how much money I have in my 318 beast. I did do all new fuel lines and pick up tubes in the tank on that one. I thought I did points, plugs and wires also but it's hard to keep track.

 

[PA212]

That’s one of the reasons I haven’t ventured into the 300 series @Kster526, the attachments seem to be very expensive. The idea of hydraulic lift, a power angle plow and power steering is very tempting though…

 

[truck21]

They're well worth the extra money.....of course that's just my opinion.....lol

 

[Kster526]

He is young yet Don!!!!!
The power steering and hydraulic lift with that snow blower on will make the job just that much easier.
Especially after I use one of the 700 series from the hospital
Since the 314 has dual ports that one is already half way there just lacks the power stearing and with the blower it steers a little harder.
Just doing the spark plugs and oil change and air filter. then I know its done. Not touching the points
You can see that it has the new rubber fuel line its still nice and clean.
And I agree with your opinion it is worth the extra dollars. The 300 series opens the doors to a lot more uses with the hydraulics. People building all kinds of stuff on them on YOUTUBE.

 

[Chaser]

I have to do the 316 before winter. Plugs oil change air filter. Like to do a new set of shoes all around, but that will prob wait till spring.

 

[Kster526]

Finally got time to start getting her back together
Added a new weight bar got a great deal from the man store
It was sitting there for awhile.
Stripped the 314 of its Winter attire . Put the 314 in the shed until i
can find a plow for it then probably sell the 210.
Tried to adjust the creep out of it today but…..2nd attempt tomorrow.

 

[truck21]

Looks good sir. Cab next?

 

[Kster526]

Soon the piggy bank is empty and want to get
the new back tires also.
need to sell that 214 that’s hanging around here taking up space

 

[Chaser]

Looking good brother. That 3 point would be nice. That's high on my want list.

 

[Kster526]

Yes I think it’s awesome and like Don said they are sort of
Useless without them.
I turned the weight bracket around so the weights aren’t out
so far. Only so much space to use up. May need to buy two more of those
also.

 

[PA212]

So @Kster526 what is the roster of the heard now? Enquirering minds want to know.

 

[Kster526]

No 208…….
3-110 RF 64,66,67
1-112 RF with tiller 67
1-112 electric lift with tiller 74
140,314,318
210-78
Cub 122-66
2-80 carts
and a heavy smoking 214 that’s for sale with a yard cart
as much as it smokes it starts and runs every time I move it
So Dave there u have it
Not an extensive list not a highly sought after collector list
just what I have. Who knows what changes lie ahead

No Chaser it’s still not for sale .😂

 

[HD-JD110Fan]

No 208…….
3-110 RF 64,66,67
1-112 RF with tiller 67
1-112 electric lift with tiller 74
140,314,318
210-78
Cub 122-66
2-80 carts
and a heavy smoking 214 that’s for sale with a yard cart
as much as it smokes it starts and runs every time I move it
So Dave there u have it
Not an extensive list not a highly sought after collector list
just what I have. Who knows what changes lie ahead

No Chaser it’s still not for sale .😂

Really Nice stable collection you have there Kyle, a lot of diversity and well equipped tractors. Great Looking 318 and snow blower. !!! I'm sure that'll come in handy real soon.

 

[Chaser]

Kyle, do you still have the 30 cart?

 

[PA212]

I don’t think I remember seeing the full stable roster before Kyle. A very nice collection!

Great idea on turning the weight bracket around as a space saver. I think that’s the one thing I like with the wheel weights in place of my universal stack system is the compactness.

Looking forward to seeing what’s next for the 318!

 

[Kster526]

Thank you for the kind comments everyone.
Yes Chaser nice catch I do still have the 30 cart
Today after the leaves came out to the cave and think I finally got the creepy out of the old girl.
With that being accomplished put the belly screen back on thank you
Don for sending along.
Then polished up the headlight lens and painted the outer black lip
Also just got done throwing a little polish, compound to see if I could get the hood to shine a little .
Last but not least repainted the grill. Will need to get her a grill emblem
like the 314 just got. Back to E-Bay that will make her happy!!!!