JD Fanatic Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2,145 Posts
Discussion Starter · #1 ·
15958621-D881-48A2-AFD7-890B8E375128.jpeg FF9B38E5-3B26-47C1-A1D6-F8729D64B8D9.jpeg 4EE951B7-E797-483F-8B74-78BD3A891BD6.jpeg BF1AD6CD-D5D6-41A9-950E-DF8ED2D87679.jpeg AC46C1D1-74E7-4232-B00E-289B9C102F6F.jpeg After two days of new parts , adjustments and cleaning the 235 is ready for snow removal duties.
She had an oil leak and couldn’t figure out exactly were it was coming from so the oil filter housing,oil cooler lines
were all replaced along with the oil,air filter,spark plugs ,voltage regulator and diode
along with the drive belt and new thrust washers on the rear axle. Just repainted the footboard area with truck bed coating and also repainted the front wheels as the were getting very rusty on the insides.
Changed the standard 1156 bulbs out for led’s . Think a battery may be in order but for now it’s ready to go.
 

·
Registered
Joined
·
52 Posts
Being
View attachment 6837 View attachment 6839 View attachment 6841 View attachment 6843 View attachment 6845 After two days of new parts , adjustments and cleaning the 235 is ready for snow removal duties.
She had an oil leak and couldn’t figure out exactly were it was coming from so the oil filter housing,oil cooler lines
were all replaced along with the oil,air filter,spark plugs ,voltage regulator and diode
along with the drive belt and new thrust washers on the rear axle. Just repainted the footboard area with truck bed coating and also repainted the front wheels as the were getting very rusty on the insides.
Changed the standard 1156 bulbs out for led’s . Think a battery may be in order but for now it’s ready to go.
Being ready is good.....
 
1 - 4 of 4 Posts
Top