• Welcome to JD Fanatics Forum

manual angle snow plow kit

Discussion in 'JD Garden Tractor Attachments Forum' started by backwoods, Dec 19, 2016.

  1. backwoods

    backwoods Well-Known Member

    So im sure there are enough of us who use are tractors for either snow or dirt pushing an hate getting off to adjust the angle som im looking for the best images of the kit so hopefully i can build a few.
     

  2. backwoods

    backwoods Well-Known Member

    So as time permits this week ill get out to my cave an mock one up out of cardboard an wire if it looks right then ill move to steel 
     
    truck21, johndeereelfman and Kster526 like this.
  3. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
    Well I was lucky enough to score one yesterday. Brand new in the box from one of my favorite man stores. Price wasn't that bad either and they still have one more in stock. If I had the extra I'd get it but just cannot do it. If your interested in the remaining one just send me a PM and Ill try to get you hooked up with it.
     
  4. KAJD23

    KAJD23 Well-Known Member

     
    Kster526 and johndeereelfman like this.
  5. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
    Not yet a few family issues arose I have opened it and layed it out. I'm hoping this weekend for sure.
    I'm very glad you signed up!!!! See I was trying to help out and sell the other kit for you.
     
    johndeereelfman likes this.
  6. KAJD23

    KAJD23 Well-Known Member

    Thanks I noticed. We had 3-4 of them at one time. I put one on my blade it definitely makes using it much nicer. Not many people bought them new. It seemed like and after thought on deeres part.
     
    Kster526, johndeereelfman and truck21 like this.
  7. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
    Glad to have you here with us, with your knowledge it will be a great help to some of us. I'm spoiled I can drive down the street or to your house!!
    You should go to the new member page and introduce yourself.
     
    truck21 and johndeereelfman like this.
  8. johndeereelfman

    johndeereelfman Member Staff Member

    969
    1,935
    Yes, please do so we can get to know you better. At least your first name anyway! :D
     
    Kster526, backwoods and truck21 like this.
  9. backwoods

    backwoods Well-Known Member

    Well i got bored after I had the wife's presents were wrapped so I made this out of cardboard
     

    Attached Files:

    johndeereelfman, Kster526 and KAJD23 like this.
  10. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
  11. backwoods

    backwoods Well-Known Member

    Thanks i didn't think it was bad for a half hour of mock up now once I have the money I'll get the material to build it
     
    truck21, Kster526 and johndeereelfman like this.
  12. backwoods

    backwoods Well-Known Member

    Well after looking at the pictures more last night I'm going to get heavier cardboard a make another set so I'm sure I have it right before I go to any steal
     
    johndeereelfman, Kster526 and truck21 like this.
  13. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
    IMG_1985.JPG IMG_1984.JPG IMG_1982.JPG
    It's better to come back another day. Got it all together and working. A few twists, little grinding and a little lubrication made it all come together.
     
  14. backwoods

    backwoods Well-Known Member

    I wish i.had the money to just buy one
     
    johndeereelfman, truck21 and Kster526 like this.
  15. Bob Jd110

    Bob Jd110 New Member

    4
    9
    Hi I am new to your forum. I am starting to rehab my parents 1969 110 and I am looking for the snow blade angle control for my tractor. Any help will be appreciated.
    Thanks
    Bob
     
    Kster526 and KAJD23 like this.
  16. Kster526

    Kster526 Well-Known Member

    1,875
    5,711
    Oley, Pa
    Very hard to come by. You can search E-Bay or call some of the older JD dealers and see if they have one.They are not cheap. W Maybe you’d get lucky and someone will have one that reads the sight.
    Nice to have you with us. Post a pic or two of your project when you have a chance
     
    Last edited: Mar 9, 2018
    KAJD23 likes this.
  17. Bob Jd110

    Bob Jd110 New Member

    4
    9
    thanks i will
     
    Kster526 and Chaser like this.